6 Mil Poly Bags | Extra Heavy-Duty Clear Flat Bags

6 mil is the heaviest flat poly bag we stock: 0.006" (about 150 microns), three times as thick as a standard 2 mil bag. It's the bag for loads that wear through or punch through anything thinner. We carry more than 60 sizes of 6 mil poly bags, from 2" x 3" to 38" x 64", in clear LDPE that's FDA and USDA compliant for food, sold by the case.

They're open-top bags with no zipper. Close them with a heat sealer, twist tie, zip tie or tape. If you need a bag that opens and closes again, see our 6 mil zip top bags.

Need a size that isn't listed? Request a quote.

6 Mil Poly Bags | Extra Heavy-Duty Clear Flat Bags

Filters

Active filters:

Filter

Active filters:

6 Mil Poly Bags62 products
SKUW x LThicknessUnitPriceQtyOrder

What Goes in a 6 Mil Bag

  • Castings and heavy metal parts with hard edges
  • Bone-in meat and solid frozen blocks
  • Abrasive or granular material: media, aggregate, powders
  • Heavy fills in lined boxes and cartons
  • Material stored for a long time, where the bag has to last

6 Mil or 4 Mil?

4 mil covers most heavy, sharp or frozen items and costs less per bag. Move up to 6 mil when 4 mil bags are puncturing, when the contents are abrasive, or when a single bag carries a lot of weight. 6 mil is 50% thicker than 4 mil, and you can feel the difference.

  • 1 mil: light items such as food portions, literature and small retail goods
  • 1.25 mil: economical everyday packaging
  • 1.5 mil: light parts, kitting and food
  • 2 mil: the most popular all-purpose gauge
  • 3 mil: heavier parts and freezer storage
  • 4 mil: heavy-duty use, sharp-edged parts and frozen meat
  • 6 mil (this page): our heaviest, for castings, bone-in meat and abrasive materials

Popular 6 Mil Sizes

6 Mil in Other Styles

6 mil also comes as zip top reclosable bags and poly tubing you cut and seal to length. If you're after 6 mil plastic sheeting rather than bags, that's on our poly sheeting page.

Picking a Size

Sizes are width x length, outside dimensions, and the bag opens on the width. For flat items, go about an inch bigger than the item both ways. For anything with depth, add the depth to both the width and the length, plus a little extra to close the bag.

Lining a box? Bag width = box width + box depth + 2". Bag length = box height + box depth + 6", enough to tie it off. A 12" cube works out to 26" x 30"; the closest 6 mil size we stock is 28" x 32", which gives a little extra room. The poly bag measuring guide has more examples.

Food Contact

Our 6 mil flat bags meet FDA 21 CFR 177.1520 and USDA requirements for direct food contact, so they work for bone-in cuts, frozen blocks and bulk ingredients.

Ordering

Sold by the case, 50 to 5,000 bags per case depending on size, with volume pricing on bigger orders and free shipping over $2,000. One case is fine. For repeat orders or sizes we don't list, request a quote. See every size and thickness in flat poly bags.

Questions About 6 Mil Bags

  • How thick is 6 mil? 0.006 inch, or about 150 microns.
  • Is 6 mil your thickest bag? It's the thickest flat bag we stock. For anything heavier, ask about a custom run.
  • How do I close them? They're open at the top with no zipper. You can heat seal them, but check that your sealer is rated for 6 mil film; some smaller sealers aren't. Twist ties, zip ties and tape work fine.
  • Do you make custom sizes or printed bags? Yes, with minimums. See custom packaging.